You are here:
Centrifugal pumps instruction
Centrifugal pumps instruction
1.Unscrew the pipe or hose leading into the
centrifugal pump and remove it. Insert a water hose into the centrifugal pump's
casing through the opening left when the pipe or hose was
removed.
2.Turn on the water hose to start filling the
centrifugal pump's casing with water. Allow the hose to run until water begins
to spill back out of the casing through the hole.
3.Shut off the water hose and screw the
centrifugal pump's pipe or hose onto the casing. Start the pump to test for
correct prime. If the pump does not catch prime, repeat the case filling process
until enough water resides in the case for the pump to prime
correctly.
More products of pumps
2012-08-08
Back