Hot Product

Product drawing»

Structural drawing»

You are here: The smallest diameter in the system

The smallest diameter in the system


The design is reasonable, and I agree that the expected pressure drop would be well below what you are experiencing. Assuming that your over-reading pressure gauge is accurate and you do have >22 psi, then either the pressure drop through the heater is excessive, or you have a blockage somewhere. Can you install a pressure gauge either just before or just after the heater?
Thank you all for your help and advice.I made a slight error on my original post ; the smallest diameter in the system is a 20mm (3/4

2011-08-09

Back

Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi centrifugal pump Contact MeiYan Yi
Shanghai Enine Pump & Valve Co., Ltd.
Enine centrifugal pump Contact Enine
Shanghai Saitai Pump & Valve CO., Lid.
Saitai centrifugal pump Contact Saitai
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi centrifugal pump Contact FengQi