Hot Product

Product drawing»

Structural drawing»

You are here: vertical centrifugal pumps

vertical centrifugal pumps

vertical centrifugal pumps

Vertical centrifugal pumps are also referred to as cantilever pumps. They utilize a unique shaft and bearing support configuration that allows the volute to hang in the sump while the bearings are outside of the sump. This style of pump uses no stuffing box to seal the shaft but instead utilizes a "throttle Bushing". A common application for this style of pump is in a parts washer.

Froth pumps

In the mineral processing industry, or in the extraction of oilsand, froth is generated to separate the rich minerals or bitumen from the sand and clays. Forth contains air that tends to block conventional pumps and cause loss of prime. The industry over the years has developed different ways to deal with this problem. One approach consists of using vertical pumps with a tank. Another approach is to build special pumps with an impeller capable of breaking the air bubbles. In the pulp and paper industry holes are drilled in the impeller. Air escapes to the back of the impeller and a special expeller discharges the air back to the suction tank. The impeller may also feature special small vanes between the primary vanes called split vanes or secondary vanes. Some pumps may feature a large eye, an inducer or recirculation of pressurized froth from the pump discharge back to the suction to break the bubbles.

More products of pumps

Vacuum pumps

In-line pumps

Magnetic pumps

Suber-water pumps

Screw pumps

Self-priming pumps

2012-06-06

Back

Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi centrifugal pump Contact MeiYan Yi
Shanghai Enine Pump & Valve Co., Ltd.
Enine centrifugal pump Contact Enine
Shanghai Saitai Pump & Valve CO., Lid.
Saitai centrifugal pump Contact Saitai
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi centrifugal pump Contact FengQi